Filter Holders, Dispensers for Fluids

For small-volume contamination or biological analysisThe glass microanalysis filter holder is designed for vacuum filtration of small- volume liquid samples for particulate or biological contamination analysis.

Features & Benefits

• Volume graduations clearly indicate sample volume

• Filter support available in fritted glass or stainless steel

Applications

Contamination Analysis (not for use with thick pre-filters or flammable liquids)

• XX1002500 | Microanalysis Filter Holder, 25 mm, fritted glass support-1/Pack

• XX1002530 | Microanalysis Filter Holder, 25 mm, stainless steel support-1/Pack

• XX1002502 | Fritted Glass Base with stopper, 25 mm-1/Pack

• XX1002503 | Spring Clamp, 25 mm, aluminum-1/Pack

• XX1002508 | No. 5 perforated stopper, sile-5/Pack

• XX1002514 | Funnel,15 mL, borosilcate glass-1/Pack

• XX1002532 | Base stopper & stainless steel screen-1/Pack

• XX1002535 | Gaskets, PTFE coated-10/Pack

• XX5002501 | Support Screen, 25 mm, stainless steel-1/Pack

• WP6210060 | High Output Pump, 100 V/50–60 Hz-1/Pack

• WP6211560 | High Output Pump, 115 V/60 Hz-1/Pack

• WP6222050 | High Output Pump, 220 V/50 Hz-1/Pack

• XX1002505 | Vacuum filtering flask, 125 mL-1/Pack

• XX7100004 | Tubing, 3/16 in. ID x 140 cm, sile-1/Pack

All-Glass Filter Holder (47 mm, 90 mm)

For filtration of corrosive liquids and solventsThe All-Glass Filter Holder was designed Features & Benefits for the filtration of aqueous and organic or corrosive liquids for particulate contamination analysis. The holder can also be used for HPLC solvent preparation. The vacuum connection is integrated into the filter holder base and flask cap, above the filtrate exit level. With this design, you can avoid unintentionally drawing filtrate into vacuum tubing. This design also allows simple transfer of filtrate (i.e., HPLC solvents) by pouring from the receiver flask.

 Features and Benefits

• All glass construction has broad chemical compatibility

• Borosilicate glass parts contact liquid with ground-glass sealing surfaces

• Vacuum connection to flask simplifies transfer of filtrate

 Applications

Particle Contamination Analysis, HPLC Solvent Filtration, General Filtration and Clarification

• XX1504700  | All-Glass Filter Holder Assembly with funnel, fritted base, cap, clamp, 47 mm

• XX1004703  | Spring clamp, 47 mm, aluminum

• XX1004704  | Glass funnel, 300 mL, borosilcate

• XX1504702  | Glass Base & Cap, 47 mm

• XX1504705  | Ground Joint Flask, 1 L

• XX1504732  | Glass Base & Cap with stainless steel screen, 47 mm

• XX2004703  | Gasket, PTFE

• XX2004708  | Support screen, 47 mm, stainless steel

• XX1004707  | 1L Funnel, 47 mm, ground glass seal

• XX2504754  | Funnel Cover, 47mm, sile

• XX6200006P  | Filter forceps, blunt end, stainless steel

• XX7100004  | Tubing, 3/16 in. ID x 140 cm, sile

Classic Glass Filter Holders

For 47 mm disc filtersThe Classic Glass Filter Holder is an essential tool for every research lab. The holder’s multipurpose design is appropriate for a variety of applications and is available in three different support materials for compatibility with your specific application needs.

Features & Benefits

• Designed for easy loading and removal of membranes

• Three membrane support material options to suit a variety of applications

• UV sterilize or autoclave with in place for bacteriological analysis

 Applications

General Clarification, Bacteriological Analysis, Particulate Contamination Analysis of Oils and Hydraulic Fluids, Exfoliative Cytology

• XX1004700  | Glass filter holder assembly with funnel, fritted base, stopper, clamp, 47 mm

• XX1004720  | Glass filter holder assembly, PTFE-coated, with funnel, base, stopper clamp, 47 mm

• XX1004730  | Glass filter holder with stainless steel screen, 47 mm

• XX1004702  | Base for 47 mm glass/filter holder

• XX1004703  | Spring clamp, 47 mm, aluminum

• XX1004704  | Glass funnel, 300 mL, borosilcate

• XX1004708  | No. 8 perforated stopper, sile

• XX1004703  | Spring clamp, 47 mm, aluminum

• XX1004708  | No. 8 perforated stopper, sile

• XX1004722  | Glass base, PTFE-faced, 47 mm

• XX1004724  | Funnel, PTFE-faced, 300 mL

• XX1004703  | Spring clamp, 47 mm, aluminum

• XX1004704  | Glass funnel, 300 mL, borosilcate

• XX1004708  | No. 8 perforated stopper, sile

• XX1004732  | Glass base with screen, 47 mm

• XX1004733  | Glass base without screen, 47 mm

• XX2004703  | Gasket, PTFE

• XX2004708  | Support screen, 47 mm, stainless steel

• WP6210060  | High Output Pump, 100 V/50–60 Hz

• WP6211560  | High Output Pump, 115 V/60 Hz

• WP6222050  | High Output Pump, 220 V/50 Hz

• XX1004705  | Vacuum filtering flask, 1 L

• XX1004707  | 1L Funnel, 47 mm, ground glass seal

• XX1004744  | Vacuum filtering flask, 4 L

• XX7100004  | Tubing, 3/16 in. ID x 140 cm, sile 

MilliSolve™ Filtration System

Bottle-to-bottle filtration of solvents and buffersThe MilliSolve Kit has been designed for the filtration of liquid chromatography buffers and solvents under vacuum. The system uses a 0.45 µm membrane filter to eliminate particles which can shorten column life. Vacuum filtration with the MilliSolve™ system also removes a large portion of dissolved gases from buffers, reducing the risk of air bubbles interfering with LC instruments. With automatic and continuous filtration, there is no need to add liquid into a funnel as filtration progresses. Filtration occurs in a closed system, which is important when filtering hazardous fluids. If open funnel filtration is required, the 300 mL funnel replaces the vacuum cover.

 Features & Benefits

• Automatic continuous solvent and buffer filtration eliminates the need to pour during filtration.

• 2L receiving flask includes plug and tubing for storage, eliminating filtered buffer transfer, reducing labor and lessening contamination risk

• Conical 2L flask bottom allows access to all filtered solvent or buffer

 Applications

Mobile Phase Preparation, Buffer Filtration

• XX1604700  | MilliSolve Kit, complete with 2L flask

• XX1604700  | MilliSolve Kit, complete with 2L flask

• XT1200000  | Tubing for solvent/buffer, PTFE, 70 cm

• XX1004703  | Spring clamp, 47 mm, aluminum

• XX1004704  | Glass funnel, 300 mL, borosilcate

• XX1004704  | Glass funnel, 300 mL, borosilcate

• XX1504702  | Glass Base & Cap, 47 mm

• XX1504702  | Glass Base & Cap, 47 mm

• XX1604701  | Vacuum Cover, ground glass

• XX1604701  | Vacuum Cover, ground glass

• XX1604705  | Vacuum Flask, 2 L

• XX1604705  | Vacuum Flask, 2 L

• XX1604705  | Vacuum Flask, 2 L

• XX1604705  | Vacuum Flask, 2 L

• FHUP04700  | Fluoropore Membrane Filter, PTFE, hydrophobic, unlaminated, 0.5 µm, 47 mm, white, plain

• FHUP04700  | Fluoropore Membrane Filter, PTFE, hydrophobic, unlaminated, 0.5 µm, 47 mm, white, plain

• HVLP04700  | Durapore Membrane Filter, PVDF, hydrophilic, 0.45 µm, 47 mm, white, plain

• HVLP04700  | Durapore Membrane Filter, PVDF, hydrophilic, 0.45 µm, 47 mm, white, plain

• XX1504705  | Ground Joint Flask, 1 L

• XX1504705  | Ground Joint Flask, 1 L

• XX1504732  | Glass Base & Cap with stainless steel screen, 47 mm

• XX1504732  | Glass Base & Cap with stainless steel screen, 47 mm

• XX1604706  | Vacuum Flask, 5 L, with conical bottom, glass

• XX1604706  | Vacuum Flask, 5 L, with conical bottom, glass

• XX7100004  | Tubing, 3/16 in. ID x 140 cm, silicone

Stainless Steel Filter Holders for Vacuum Filtration 

Epifluorescence Stainless Steel Filter Holder

For bacteriological analysis by epifluorescenceDesigned for accurate, quantitative vacuum filtration of samples for bacteriological analysis by epifluorescence microscopy, the highly polished stainless steel funnel prevents bacterial cells from adhering to surface.

 Applications

Bacteriological Analysis by Epifluorescence Microscopy

• XF3001200  | Epifluorescence Filter Holder, 13 mm, stainless steel

• WP6210060 | High Output Pump, 100 V/50–60 Hz

• WP6211560 | High Output Pump, 115 V/60 Hz

• WP6222050 | High Output Pump, 220 V/50 Hz

• XX1004705 | Vacuum filtering flask, 1 L

• XX7100004 | Tubing, 3/16 in. ID x 140 cm, sile

Analytical Stainless Steel Filter Holders for 13, 25, and 47 mm Disc Filters

For contamination analysisThe analytical stainless steel filter holders are designed for the vacuum filtration of samples for bacteriological or particulate contamination analysis.

 Features & Benefits

• Available in three diameters with four available funnel sizes to accommodate samples up to 250 mL

• Holder with 250 mL funnel is equipped with a funnel lid, which can be vented using accessory filter unit

• Can be autoclaved or flame sterilized

 Applications

Bacteriological or Particulate Contamination Analysis

• XF2004710  | 100 mL Filter Holder, 47 mm, stainless steel-1/Pack

• XF2004725  | 250 mL Filter Holder, 47 mm, stainless steel-1/Pack

• XX1002540  | 50 mL Filter Holder, 25 mm, stainless steel-1/Pack

• XX1002503  | Spring Clamp, 25 mm, aluminum-1/Pack

• XX1002535  | Gaskets, PTFE coated-10/Pack

• XX1002542  | Base Assembly for 25 mm filter holder-1/Pack

• XX2004718  | No. 8 stopper, 9.5 mm (3/8 in.) hole, sile-5/Pack

• XX5002501  | Support Screen, 25 mm, stainless steel-1/Pack

• XF2004755  | Stainless Steel Funnel, 100 mL-1/Pack

• XF2004756  | Stainless Steel Funnel, 250 mL-1/Pack

• XF2004758  | Stainless Steel Support Frit-1/Pack

• XX1004703  | Spring clamp, 47 mm, aluminum-1/Pack

• XX1004708  | No. 8 perforated stopper, sile-5/Pack

• SLFG02550  | Millex-FG Filter Unit, 0.20 µm, hydrophobic PTFE, 25 mm-50/Pack

• XX1004705  | Vacuum filtering flask, 1 L-1/Pack

• XX1004744  | Vaccum filtering flask, 4 L-1/Pack

• XX7100004  | Tubing, 3/16 in. ID x 140 cm, sile-1/Pack

Hydrosol Stainless Steel Filter Holder

For analysis of flammable liquidsThe Hydrosol filter holder is designed for the filtration of flammable liquids. Unlike other filter holders, the Hydrosol filter holder includes a grounding unit to prevent sparking from static discharge, which can be a safety hazard.

 Applications

Vacuum Filtration of Flammable Liquids

• XX2004720  | Hydrosol 47 mm filter holder, stainless steel

• XX2004702  | Base with screen, gasket and stopper

• XX2004703  | Gasket, PTFE

• XX2004704  | Funnel & locking ring assembly, stainless steel

• XX2004708  | Support screen, 47 mm, stainless steel

• XX2004718  | No. 8 stopper, 9.5 mm (3/8 in.) hole, sile

• XX20047RK  | Replacement parts kit, Hydrosol holder

• WP6210060  | High Output Pump, 100 V/50–60 Hz

• WP6211560  | High Output Pump, 115 V/60 Hz

• WP6222050  | High Output Pump, 220 V/50 Hz

• XX1004705  | Vacuum filtering flask, 1 L

• XX1004744  | Vacuum filtering flask, 4 L

• XX2504700  | 6-place manifold, 47mm, stainless steel

• XX2504735  | 3-place manifold, 47mm, stainless steel

• XX2604735  | 3-place manifold, 47mm, PVC

• XX6200006P  | Filter forceps, blunt end, stainless steel

• XX7100004  | Tubing, 3/16 in. ID x 140 cm, sile

Stainless Steel Filter Holders for Pressure Filtration

Stainless Steel Syringe and Microsyringe Filter Holders

Reusable, syringe-driven filter unitMake your own syringe filter!  Microsyringe and Swinny filter holders give you the flexibility to select the membrane type and diameter that are most appropriate for your application. For sterile filtration, autoclave your holder with the membranes in place. Ultraclean or sterilize small volumes of liquids dispensed by a syringe or install in-line to filter larger volumes.

Features & Benefits

• Available in two sizes for a range of process volumes

• Durable stainless steel construction ensures years of use, decreasing waste from disposable syringe filters.

• Autoclavable with filter in place for sterile filtration

Applications

Ultracleaning or Sterilization of Liquids

• XX3001200  | Swinny Filter Holder 13 mm, stainless steel

• XX3002500  | Microsyringe Filter Holder 25 mm, Luer-Lok, stainless steel

• XX3002514  | Microsyringe Filter Holder 25 mm, NPTF, stainless steel 

High Pressure In-Line Stainless Steel Filter Holders (25 and 47 mm)

For in-line High Pressure Filtration, up to 700 barThe In-Line Stainless Steel Filter Holders are designed for filtration of gases or liquids at inlet pressures of 20 to 700 bar. Differential pressure depends on the filter type used. All filter holders maybe autoclaved. The 47 mm In-Line filter holder (cat. no. XX4404700) is equipped with a back-pressure support screen. It maybe autoclaved with filter in place, as long as the optional PTFE-coated support screens (cat. no. XX4404702 and XX4404704) are used. The 47 mm High-Pressure holder (cat. no. XX4504700) may be equipped with the upstream support screen (cat. no. XX4504704) for back-pressure protection of filter.

Features & Benefits

• Safe for use with inlet pressures up to 700 bar

• Devices are autoclavable; autoclaving with filter in place requires optional PTFE-coated support screens

Applications

In-Line Filtration of Fluid Process Streams

• XX4404700  | Filter Holder, 47 mm, stainless steel-1/Pack

• XX4404700  | Filter Holder, 47 mm, stainless steel-1/Pack

• XX4502500  | HP Filter Holder, 25 mm, stainless steel-1/Pack

• XX4502500  | HP Filter Holder, 25 mm, stainless steel-1/Pack

• XX4504700  | HP Filter Holder, 47 mm, stainless steel-1/Pack

• XX4504700  | HP Filter Holder, 47 mm, stainless steel-1/Pack

• XX4504700  | HP Filter Holder, 47 mm, stainless steel-1/Pack

• XX45025RK  | Replacement Parts Kit, 25 mm filter holder-1/Pack

• XX45025RK  | Replacement Parts Kit, 25 mm filter holder-1/Pack

• 009507P  | Pipe Plug, 1/8 in.-1/Pack

• 5614  | Underdrain Screen, 47 mm-1/Pack

• XX4204709  | Support Screen, 47 mm-1/Pack

• XX4204709  | Support Screen, 47 mm-1/Pack

• XX4304701  | O-ring (2-131), silicone-6/Pack

• XX4304701  | O-ring (2-131), silicone-6/Pack

• XX4404703  | Back-pressure Screen, 47 mm, stainless steel-1/Pack

• XX4404703  | Back-pressure Screen, 47 mm, stainless steel-1/Pack

• Catalog No- For XX45 047 00-Pack Size

• XX4504704  | Filter Support Screen, 47 mm, stainless steel-1/Pack

• XX4504704  | Filter Support Screen, 47 mm, stainless steel-1/Pack

• XX4504705  | Inner O-ring, 47 mm, PTFE-treated fluoroelastomer-5/Pack

• XX4504705  | Inner O-ring, 47 mm, PTFE-treated fluoroelastomer-5/Pack

• XX4504710  | Inner O-ring, 47 mm, PTFE-5/Pack

• XX4504710  | Inner O-ring, 47 mm, PTFE-5/Pack

• XX4504713  | Outer O-ring, 47 mm, fluoroelastomer-10/Pack

• XX4504713  | Outer O-ring, 47 mm, fluoroelastomer-10/Pack

• XX45047RK  | Replacement Parts Kit, 47 mm filter holder-1/Pack

• XX45047RK  | Replacement Parts Kit, 47 mm filter holder-1/Pack

• XX45047RK  | Replacement Parts Kit, 47 mm filter holder-1/Pack

Solvent Filtering Dispenser

Point-of-use, hand-operated solvent filtrationUltra-clean and dispense small volumes of solvent by squeeze-bottle action. This hand pressure operated dispenser features a filter holder fitted with a delivery tube. Used to direct filtered solvent against surfaces.

Features & Benefits

• Integrated hand pump eliminates the need for external pump

• Holds up to1 L of solvent

Applications

Solvent Filtration Prior to Contamination, Analysis, Solvent Rinsing of Machined Parts and Collection Containers

• XX6602500  | Solvent Filtering Dispenser, 25 mm-1/Pack

• XX3002502  | Filter Holder Gasket, PTFE-10/Pack

• XX3002510  | Filter Holder Support Screen, stainless steel-1/Pack

• XX6602501  | Flask and neoprene stopper-1/Pack

Filterjet Solvent Dispenser

Point-of-use solvent filtrationApply a concentrated jet spray of ultra cleaned solvent or rinse solution to surfaces that require washing. Just connect the Filterjet™ dispenser to a dispensing pressure vessel to ensure that the solvent or other liquid is filtered immediately before dispensing. The filter holder (cat. No. XX4002500), which is part of the dispenser, can also be used by itself for in-line pressure filtration of gases

Applications

Solvent Filtration Prior to Contamination Analysis, Solvent Rinsing of Machined Parts and Collection Containers

• XX6702500  | Filterjet Solvent Dispenser, 25 mm-1/Pack

• XX4002500  | Gas Line Filter Holder, 25 mm, stainless steel-1/Pack

• XX40025RK  | Replacement Parts Kit for filter holder includes (5) PTFE locking nut washers, (5) PTFE O-rings, (5) stainless steel support screens-1/Pack

• XX6702501  | Handle and Valve Assembly-1/Pack

• XX6702502  | Valve Seals, PTFE-4/Pack

• XX6702506  | Pressure Tubing with 1/4 in. NPT adapters, PE-1/Pack

• XX6702507  | Tube Adapter, 1/4 in. NPTM to 1/4 in. Tube-1/Pack

• XX6702508  | Tubing, 6 mm O.D. x 3 m, polypropylene-1/Pack

• XX67025RK  | Replacement Kit for Filterjet Solvent Dispenser includes (1) stainless steel jet nozzle, (1) fan spray nozzle, (1) cone spray nozzle-1/Pack

• XX6700030  | Quick-release Nipple & Coupling, 1/4 in. NPTM

• XX6700P05  | Dispensing Pressure Vessel, 5 L

• YY1301015  | Pressure Gauge, 0–7 bar

• YY2029348  | Ball Valve, 1/4 in. NPTF, stainless steel

Stainless Steel Pressure Filter Holders

Pressure-driven filtration of up to 340 mL of liquidThese filter holders are ideal for ultracleaning or sterilizing batch volumes of liquids. The cylindrical barrel holds 100 mL (or 340 mL) of liquid, which is filtered by externally applied gas pressure through a suitable filter supported on the holder base.

Features & Benefits

• Filter holder has reservoir to hold 100 mL (or 340 mL) of liquid for batch filtration

• Autoclavable with membrane in place for sterile filtration

Applications

Batch Filtration

• XX4004700  | Stainless Steel Pressure Filter Holder, 47 mm, 100 mL-1/Pack

• XX4004740  | Stainless Steel Pressure Filter Holder, 47 mm, 340 mL-1/Pack

• 205  | Top Cap with hose adapter-1/Pack

• XX2004703  | Gasket, PTFE-25/Pack

• XX2004718  | No. 8 stopper, 9.5 mm (3/8 in.) hole, silicone-5/Pack

• XX4004704  | Filter Support Screen, stainless steel, 47 mm-1/Pack

• XX4004714  | Locking Ring Gasket, PTFE-5/Pack

• XX4004716  | O-rings, PTFE-5/Pack

• XX40047RK  | Replacement Parts Kit, 47 mm holder-1/Pack

• XX1004705  | Vacuum filtering flask, 1 L-1/Pack

• XX1004744  | Vaccum filtering flask, 4 L-1/Pack

• XX6700034  | 3 meters PVC tubing with 9.5 mm internal diameter-1/Pack

• XX7100004  | Tubing, 3/16 in. ID x 140 cm, silicone-1/Pack

Standing Stainless Steel Filter Holders (90 and 142 mm)

Filter holders supported by legsThe stainless steel filter holders are designed to ultraclean or sterilize liquids or gases by pressure filtration. PTFE-faced support screens permit autoclaving with membranes in place

• YY3009000  | Filter Holder 90 mm, stainless steel-1/Pack

• YY3014236  | Filter Holder 142 mm, stainless steel-1/Pack

• XX2504705  | Hose adapter, 1/4in. NPTM to 3/8in. ID-1/Pack

• XX4204708  | Vent/Relief Valve-1/Pack

• YY2209058  | Underdrain Support, 90 mm-1/Pack

• YY2209059  | Legs (3)-3/Pack

• YY3009053  | O-rings, 90 mm filter housing, PTFE-4/Pack

• YY3009054  | Support Screen, PTFE-coated-1/Pack

• YY2004045  | Clamp 1 1/2 in. TC-1/Pack

• YY2004055  | 1 1/2 in. TC silicone gasket-1/Pack

• YY2004076  | Adapter 1-1/2 in. TC to 14 mm-1/Pack

• YY2214251  | Legs with Caps, 3/16 in. wrench-3/Pack

• YY2214252  | Handwheel Wrench for 142 mm holder-1/Pack

• YY2214253  | O-ring, 2-251, PTFE-1/Pack

• YY2214257  | Hand Knob-1/Pack

• YY2214258  | Underdrain Support, 142 mm - 1/Pack

• YY2214265  | O-ring, 2-251, silicone-4/Pack

• YY3014234  | Support Screen for 142 mm filter holder, PTFE-coated-1/Pack

• YY3029307  | Inlet Flow Deflector, 316 Holder-1/Pack

• YY3029366  | Vent/Relief Valve, 9 bar (125 psig)-1/Pack

Plastic Filter Holders for Vacuum Filtration

1225 Sampling Manifold

For multi-sample vacuum filtrationSimultaneously vacuum filter 12 samples for rapid analysis of retentate or filtrate. Numbered positions on the filter plate assure accurate sample tracking. Sealing stoppers maintain vacuum on unused sample cups. Accessory extension barrels increase sample volumes from 15 to 50 mL.

Applications

General Filtration of 15 to 50 mL Samples, Preparation for Scintillation Counting

• XX2702550  |  1225 Sampling Manifold - 1/Pack

• 5162  | Top Plate - 1/Pack

• 5163  | Support Plate - 1/Pack

• XX11000PP  | Ball Valve, glass - filled polypropylene - 1/Pack

• XX2504755  | Tubing, 1/4in. x 23in., latex - 1/Pack

• XX2702509  | Filter O - ring, sile - 30/Pack

• XX2702510  | Support Screen, 25 mm, polypropylene - 30/Pack

• YY2214257  |  Hand Knob - 1/Pack

• XX2702552  |  Chamber O - rings and plug set - 1/Pack

• XX2702555  |  Sample Cup Extension Barrel - 12/Pack

• XX6200006P  | Filter forceps, blunt end, stainless steel - 3/Pack

• XX7100004  | Tubing, 3/16 in. ID x 140 cm, sile - 1/Pack

Sterifil Aseptic System and Holder

Reusable, autoclavable device with removable membraneThe Sterifil aseptic system was designed as a tool for general filtration applications and filtration of samples for particulate or biological contamination analysis. Sterifil holder and funnel are available separately (without receiver flask and cover) to use with standard 1 L filter flasks or multiple place manifolds.

Features & Benefits

• Closed unit protects samples and from environmental contamination

• Device is autoclavable with membrane in place for sterile applications with less waste

• Optional hand pump allows for on-site filtration

Applications

General Filtration, Field-based Filtration (with optional hand pump), Sterile Filtration, Bioburden Monitoring, Counting Microorganisms, Filtration Processes Requiring Membrane to be Retained

• XX1104700   | Sterifil aseptic system, 47 mm - 1/Pack

• XX1104710   | Sterifil holder, 250 mL, includes components (1) to (9) - 1/Pack

• XX11J4750   | Sterifil holder, 500 mL - 1/Pack

• AP2501300   | Glass Fiber Filter with binder, AP25, 13 mm - 100/Pack

• SX0001300   | Swinnex Filter Holder, 13 mm - 10/Pack

• XX1104702   | Filter holder base and support screen - 1/Pack

• XX1104703   | Sterifil funnel cover - 1/Pack

• XX1104704   | Sterifil funnel, 250 mL, 47 mm, Polysulfone - 1/Pack

• XX1104705   | Sterifil receiver flask, 250 mL - 1/Pack

• XX1104706   | Cover for Sterifil receiver flask - 1/Pack

• XX1104707   | O - ring, (5 - 329) for Swinnex 47 mm filter holder, sile - 10/Pack

• XX1104711   | Caps, gum rubber - 100/Pack

• XX1104715   | Support screen, 47 mm, polypropylene - 1/Pack

• XX2004718   | No. 8 stopper, 9.5 mm (3/8 in.) hole, sile - 5/Pack

• WP6210060   | High Output Pump, 100 V/50–60 Hz - 1/Pack

• WP6211560   | High Output Pump, 115 V/60 Hz - 1/Pack

• WP6222050   | High Output Pump, 220 V/50 Hz - 1/Pack

• XKEM00107   | Hand Vacuum Pump, polypropylene - 1/Pack

• XX2604735  |  3 place manifold, 47mm, PVC - 1/Pack

• XX7100004   | Tubing, 3/16 in. ID x 140 cm, sile - 1/Pack

Plastic Filter Holders for Pressure Filtration

Swinnex® Filter Holders

Reusable, syringe-driven filter unitMake your own syringe filter! Swinnex® filter holders give you the flexibility to select the membrane type and diameter that are most appropriate for your application. For sterile filtration autoclave your Swinnex® filter holders with the membrane in place. Ultraclean or sterilize small volumes of liquids dispensed by a syringe or install in-line to larger volumes.

Features & Benefits

• Available in three sizes for a range of process volumes

• Autoclavable with filter in place for sterile filtration

Applications

Ultracleaning or Sterilization of Liquids

• SX0001300  |  Swinnex Filter Holder, 13 mm - 10/Pack

• SX0002500  |  Swinnex Filter Holder, 25 mm - 12/Pack 

• SX0004700  |  Swinnex Filter Holder, 47 mm - 8/Pack 

• SX0001301  |  Silicone Gaskets for 13 mm Swinnex filter holder - 100/Pack

• SX0002501  |  Silicone Gaskets for 25 mm Swinnex filter holder - 100/Pack 

• SX0004701  |  Base O-ring for Swinnex 47 mm filter holder, silicone - 5/Pack 

• SX00047RK  |  Replacement parts kit for Swinnex 47 mm filter holder - 1/Pack 

• XX1104707  |  O-ring, (5-329) for Swinnex 47 mm filter holder, silicone - 10/Pack

• XX1104715  |  Support screen, 47 mm, polypropylene - 1/Pack 

• XX2702510  |  Support Screen, 25 mm, polypropylene - 30/Pack 

• XX1102012  |  Plastic Syringes, 20mL Luer slip, polypropylene - 12/Pack

• XX1102503  |  Adapter, male M Luer-Lok, nylon - 4/Pack 

• XX1105005  |  Plastic Syringes, 50mL Luer slip, polypropylene - 5/Pack 

• XX2004718  |  No. 8 stopper, 9.5 mm (3/8 in.) hole, silicone - 5/Pack 

• XX3002568  |  Adapter, 1/4 in. NPTF to F Luer-Lok - 1/Pack 

• XX6200006P  | Filter forceps, blunt end, stainless steel - 3/Pack 

In-Line Filter Holder

Reusable pressure-driven filter housingIn line filter holder is used to Ultraclean liquids or gases in line by pressure filtration. Simply open the housing to change the  filter without disturbing the attached plumbing. 

Features & Benefits

• Stepped hose barb connections at both ends for easy installation

• Large, easy to grip hand knobs

Applications

General Filtration (in-line)

• XX4304700  |  In-Line Filter Holder 47 mm - 1/Pack 

• XX1104715  |  Support screen, 47 mm, polypropylene - 1/Pack 

• XX4304701  |  O-ring (2-131), silicone - 6/Pack

• XX4304704  |  Hose adapter, 1/4 in. NPTF to 5/16 in. ID, polypropylene 2/Pack 

• XX4304705  |  Hand Knobs - 3/Pack 

• XX4304702  |  O-ring, (2-131), fluoroelastomer - 6/Pack 

• XX4304707  |  Stainless Steel Support Screen, 47 mm - 1/Pack 

• XX6200006P  | Filter forceps, blunt end, stainless steel - 3/Pack 

• XX6700034  | 3 meters PVC tubing with 9.5 mm internal diameter - 1 /Pack