Hazardous Waste Filtration System

ZHE Hazardous Waste Filtration System (90 mm)

EPA-approved for EP Toxicity Test and TCLP

Do your waste samples contain volatile substances, such as isopropanol, acetone or xylene? Then use our ZHE (Zero Head Space Extractor) Hazardous Waste Filtration system, which is approved by the US Environmental Protection Agency (EPA) as an apparatus for Toxicity Characteristic Leaching Procedure (TCLP) measurement.

Features & Benefits

• Allows for pressurization of filter without introducing air, due to movable piston design Prevents loss of volatiles

• Manual and automatic venting modes

• System cannot be pressurized unless completely assembled, thereby preventing “shooting the piston” out of the unit accidentally

Applications

US EPA Extraction Procedure (EP) Toxicity Test and Toxicity Characteristic Leaching Procedure

• YT30090HW | Millipore ZHE Hazardous Waste System 1/Pack

• 13899 | ZHE Holder, piston pusher 1/Pack

• XX2702512 | 2-way Valve, 1/8 in. NPTM, stainless steel 1/Pack

• XX6700010 | Cylinder O-rings 3/Pack

• XX6700024 | Vent/Relief Valve, 9 bar 1/Pack

• XX6700104 | Street Elbow, 1/4 in. NPTF to M 1/Pack

• YT3009001 | Piston with O-rings, wiper seal 1/Pack

• YT3009002 | Fitting Luer 1/8 in. NPTF 1/Pack

• YT3009003 | Piston O-rings, wiper seal 3/Pack

• YT3009013 | Quick-disconnect Female Swagelok 1/Pack

• YT3009014 | Quick-disconnect Male Swagelok 1/Pack

• YY2209064 | Support Screen 90 mm, stainless steel 1/Pack

• YY2209068 | O-ring, 2-235, 90 mm, fluoroelastomer 6/Pack

• YY2214257 | Hand Knob 1/Pack

• XX6700P05 | Dispensing Pressure Vessel, 5 L 1/Pack

• YT3009015 | ZHE Tight Syringe, 50ml 1/Pack

• YT3009016 | ZHE Tedlar Bag, 1 liter 10/Pack

• XX3002567 | Adapter, 1/8 in. NPTF to M Luer-Lok, chrome plated 1/Pack

• XX6700024 | Vent/Relief Valve, 9 bar 1/Pack

• XX6700030 | Quick-release Nipple & Coupling, 1/4 in. NPTM 1/Pack

• XX6700125 | Hex Nipple, 1/4 in. NPTM 51 mm., stainless steel 1/Pack

• XX6702507 | Tube Adapter, 1/4 in. NPTM to 1/4 in. Tube 1/Pack

• XX6702508 | Tubing, 6 mm O.D. x 3 m, polypropylene 1/Pack

• YT3009013 | Quick-disconnect Female Swagelok 1/Pack

• YY1301015 | Pressure Gauge, 0–7 bar 1/Pack

• YY2029348 | Ball Valve, 1/4 in. NPTF, stainless steel 1/Pack

Hazardous Waste Filtration System (142 mm)

EPA approved for TCLP

If your waste samples contain non-volatile or semi-volatile substances or metals, use this Hazardous Waste Filtration System for separation, extraction, and filtration. Developed in collaboration with the US Environmental Protection Agency (EPA), the system is designed for the US EPA Extraction Procedure (EP) Toxicity Test and Toxicity Characteristic Leaching Procedure (TCLP). The device separates solid and liquid phases of waste samples for analysis.

Features & Benefits

• Contains interior holder with PTFE coating to prevent heavy metal contamination

• Allows easy introduction of bulky samples through wide entry port and removable top plate

• Disassembles for easy cleaning

Applications

US EPAEP Toxicity Test and Toxicity Characteristic Leaching Procedure

• YT30142HW Hazardous Waste Filtration System, 142 mm 1/Pack

• YT3014257 | Under drain Support, PTFE-coated 1/Pack

• YY2004045 | Clamp 1 1/2 in. TC 1/Pack

• YY2004055 | 1 1/2 in. TC sile gasket 1/Pack

• YY2214251 | Legs with Caps, 3/16 in. wrench 3/Pack

• YY2214252 | Hand wheel Wrench for 142 mm holder 1/Pack

• YY2214253 | O-ring, 2-251, PTFE 1/Pack

• YY2214257 |Hand Knob 1/Pack

• YY2214265|O-ring, 2-251, sile 4/Pack

• XX6700035 |Tubing for pressure use, 1/2 in. ID 1/Pack

• YY2004057|Gasket, 1-1/2 in., PTFE-coated fluoroelastomer 10/Pack