Embedded Files
Merck Millipore contamination analysis kit
Merck Millipore contamination analysis kit
Merck Millipore contamination analysis kit consists of assorted Merck Millipore filtration products suited for contamination measurement and control. Merck Millipore T est kit is recommended for ensuring conformance to cleanliness standards popularly known as the "Millipore Value". The kit is available in two versions: Basic kit and Professional kit
Conforms to standard contamination test procedures such as ARP-598 (hydraulic fluids), ASTM-D2276 (aviation turbine fuels), and federal standard 791a (lubricants, liquid fuels, and related products). Includes expendable materials for approximately 600 tests
The Fluid Contamination Kit is a complete collection of hardware and consumables to properly equip your lab for contamination analysis. The kit conforms to standard contamination test procedures such as ARP-598 (hydraulic fluids) and federal standard 791a (lubricants, liquid fuels, and related products).
Features & Benefits
Contain enough expendable materials for approximately 600 tests
Includes a vacuum pump for either 115 V or 220 V electric current
Applications
Fluid Contamination Monitoring of Water, Hydraulic Fluid, Fuel Liquids and Related Fluids
Vacuum / Pressure Pump
Vacuum / Pressure Pump
This oil free pump is a portable AC powered source of vacuum to 585mm/ 23” Hg (at mean sea level) or pressure to 4 bar/ 58 psig for filtration of liquids or gases or other continuous or intermittent use with all types of filter holders.Air flow rates at different vacuum and pressure settings are given behind (for vacuum operation, pump exit pressure is 1 atmosphere). The motor is permanently lubricated, and is protected by a thermal overload switch with automatic reset
This oil free pump is a portable AC powered source of vacuum to 585mm/ 23” Hg (at mean sea level) or pressure to 4 bar/ 58 psig for filtration of liquids or gases or other continuous or intermittent use with all types of filter holders.Air flow rates at different vacuum and pressure settings are given behind (for vacuum operation, pump exit pressure is 1 atmosphere). The motor is permanently lubricated, and is protected by a thermal overload switch with automatic reset
Hydrosol SST Filter Holder
Hydrosol SST Filter Holder
Vacuum filtering liquids for analysis ofparticulate or biological contamination analysis via vacuum filtration. Funnel, base and support screen are made of SS, anodized locking ring, T eflon gaskets, grounding set and silicon stopper
Vacuum filtering liquids for analysis ofparticulate or biological contamination analysis via vacuum filtration. Funnel, base and support screen are made of SS, anodized locking ring, T eflon gaskets, grounding set and silicon stopper
Vacuum Filtering Flask
Vacuum Filtering Flask
Used for vacuum filtration with Millipore filter holders. Side arm connects to vacuum source with vacuum hose. Also used as water trap to prevent liquid/ mist entering the pump.
Used for vacuum filtration with Millipore filter holders. Side arm connects to vacuum source with vacuum hose. Also used as water trap to prevent liquid/ mist entering the pump.
Filter Forceps
Filter Forceps
Used to handle Millipore Membrane filters without damage using highly polished SS forceps blades with beveled, unserrated tips.
Used to handle Millipore Membrane filters without damage using highly polished SS forceps blades with beveled, unserrated tips.
Vacuum Trap
Vacuum Trap
During the vacuum filtration of liquids, to prevent liquids or mist entering the pump, Millipore recommends use of vacuum trap between vacuum pump and filter holder. This assembly consists of vacuum filtering flask, silicone stopper, glass tube and vacuum hose.
During the vacuum filtration of liquids, to prevent liquids or mist entering the pump, Millipore recommends use of vacuum trap between vacuum pump and filter holder. This assembly consists of vacuum filtering flask, silicone stopper, glass tube and vacuum hose.
Solvent Filtering Dispenser
Solvent Filtering Dispenser
Ultra clean and dispense small volumes of solvent/liquids by squeeze bottle action. Hand pressure operated dispenser with filter holder fitted with a delivery tube used to direct filter solvent/liquids against surfaces. Flask is made of borosilicate glass, neoprene bulb, stopper and SS filter holder with teflon gasket which is meant to accommodate 25mm Membrane filters.
Ultra clean and dispense small volumes of solvent/liquids by squeeze bottle action. Hand pressure operated dispenser with filter holder fitted with a delivery tube used to direct filter solvent/liquids against surfaces. Flask is made of borosilicate glass, neoprene bulb, stopper and SS filter holder with teflon gasket which is meant to accommodate 25mm Membrane filters.
Dispensing Pressure Vessel
Dispensing Pressure Vessel
Dispensing Pressure Vessel holds liquid for filtration through Millipore pressure operated filter holders, if connected to an external pressure source. Body and fittings are made of 316 SS, Viton O-ring and base is moulded with Styrene butadiene rubber.
Dispensing Pressure Vessel holds liquid for filtration through Millipore pressure operated filter holders, if connected to an external pressure source. Body and fittings are made of 316 SS, Viton O-ring and base is moulded with Styrene butadiene rubber.
Filterjet Solvent Dispenser
Filterjet Solvent Dispenser
Used to spray concentrated jet of ultra clean solvent or rinse solution on surfaces for cleaning. SST filter holder wi th support screen is meant toaccommodate 25 mm membrane filters.
Used to spray concentrated jet of ultra clean solvent or rinse solution on surfaces for cleaning. SST filter holder wi th support screen is meant toaccommodate 25 mm membrane filters.
Petri Slides
Petri Slides
Holds filter securely in place. Transparent cover allows microscopic examination without removal. Rectangular base has rounded corners for mounting on microscope stage. Recommended for storage.
Holds filter securely in place. Transparent cover allows microscopic examination without removal. Rectangular base has rounded corners for mounting on microscope stage. Recommended for storage.
Catalogue Information
Catalogue Information
XX7104711K | Fluids Contamination Analysis Kit, 115 V/60 Hz
XX7104712 | Fluids Contamination Analysis Kit, 230 V/50 Hz
PD1504700 | PetriSlides for contamination analysis
WP6111560 | Chemical Duty Pump, 115 V/60 Hz
WP6122050 | Chemical Duty Pump, 220 V/50 Hz
XX1004705 | Vacuum filtering flask, 1 L
XX1004730 | Glass filter holder with stainless steel screen, 47 mm
XX2504755 | Tubing, 1/4in. x 23in., latex
XX6200006P | Filter forceps, blunt end, stainless steel
XX6602500 | Solvent Filtering Dispenser, 25 mm
HABG04700 | MF-Millipore Membrane Filter, mixed cellulose esters, Hydrophilic, 0.45 µm, 47 mm, black, gridded
HAWG04700 | MF-Millipore Membrane Filter, mixed cellulose esters, Hydrophilic, 0.45 µm, 47 mm, white, gridded
HAWP04700 | MF-Millipore Membrane Filter, mixed cellulose esters, Hydrophilic, 0.45 µm, 47 mm, white, plain
Page updated
Report abuse